ProgSkeet is your one and only solution to your flashing needs. Whether it is NAND, NOR or any other kind of non-volatile memory - just solder, plug in and operate!
Cost-effective alternative to industrial programmers.
This programmer is intended for three main purposes:
Industrial: programming large amounts of NAND / NOR / EEPROM IC in electronics production.
Educational: understanding of and experimenting with devices as described by EUCD and DMCA.
Repair/Recovery: reprogramming onboard memory using vendor firmware due to prior update fault.
100% PIN to PIN compatible with the 360-Clip (solderless adapter).
WARNING: PROGSKEET chip are sold EMPTY. All progskeet users from today need to have also the INJECUTS programmer to enjoy all the feature of PROGSKEET V1.2.
This new progskeet version introduce these changes:
1- Redesign of main board now more small and stable (4 layers) 2- Slave baord with USB, LED, SWITCH (for memory banks selection) 3- FCC cable 15 pins that allow to connect externally the slave board 4- Bus SPI on FCC cable for future expansions 5- 100% support of WINSKEET 6- DLL OPEN library to allow integration in other alternative programs
Finally progskeet team stop to supprot CLIP tools, too much expensive and with a really bad quality. The alternative will be nice QSB BOARDS NOR / NAND for different consoles that will be soon availables.
The kit now works exactly like PROGSKEET V1.1 but soon new features will be added.
And always remember - for accuracy and speed, choose ProgSkeet!
Optionally but recommended: 3. 360-Clip, solderless IC adapter (for NAND consoles) (TW_100) 4. ProgSkeet dual adaptor PCB kit, with FCC cables (for NAND consoles) (PrSkAdp) 5. 360-Clip, NOR 56-pin, solderless IC adapter (for NOR consoles) (TW_1102)
Beside software-side updates, you can also expect hardware updates powered by customer requests!
With a broad range of applications, such as EEPROM programming (among others: Altera, Lattice FPGA/CPLD), Bad flash recovery, more commonly known as "Unbricking" (Modems, video cards, cell phones, music players) and plain serial programming (manufacture of your own device).
Supported devices include, but are not limited to: K9F1G08, S29GL128, K8Q2815, HY27US08.
Industrial programmers often range in the EUR 1000+ range with limited customer support. ProgSkeet can compete with these programmers all the while maintaining low cost!
NOTE: Do not forget to order JTAG USB programmer! See below.
Designed for Xbox 360, Wii, PS3 that are already supported.
Including support for PS3s that have two NANDs onboard, and now supports flashing for Wii consoles as well!
The team said that other devices will be supported later as satellite receivers dreambox. So this will allow you to retrieve an image or flash memory of your console, but also debricker your console or to the Dual-NAND.
High quality 2mm PCB
Solder treated
Very high dump speed!
ZIP 50 pin connector onboard
NOTE: Remember that using PROGSKEET with solderless kit requires ACTEL PROGSKEET firmware vers. 111126 or later. The firmware is always available for download on the DOWNLOAD area of progskeet website.
The update of ACTEL progskeet is possibile with INJECTUS programmer only.
Before proceeding to buy ProgSkeet, please consult local as well as international laws to determine whether or not your intended use is legal under aforementioned legislations.
*** NOTE! Return policy for this kind of products - no return possible. We exchange it for new one only if the hardware is deffective. If you cant use it please search more info on the internet. The features and software is constantly developing, improving and changing. ***
*** Ej öppet köp! Ingen returrätt på dessa verktyg, dvs du kan inte köpa verktyget, använda det en gång och sedan returnera den. ***
TIP A FRIEND
